800g Auto Headlight Restoration Liquid, Car Headlight Scratch Restoring Fluid Headlight Repair Polish Cleaner, Headlight Restoration Kit Refill Bottle for Polishing, Restoring Dull Yellow Headlamp

I do a lot of work on my car and sometime my friends cars. This brought the headlights back to life . It get very hot so I would be carful using it.

Was real hesitant about these products but then I read the reviews and gave it a shot. 110% worth it. Just follow the instructions and your will be good

Project worked great make sure you protect the surrounding area to prevent scratches to the paint. The more I sanded the better the results were.

I'd love to say this works fantastically, but the vapor isn't very strong whether the spout or straw is used. This results in a sparse or sporadic coverage area. If there is a slight wind, forget about using it. In order to get full coverage I was having to hold the cup very close to the headlight, resulting in drips which have to be sanded off and re treated. The process is difficult on the arms and time consuming. I will say that the shiny headlight is worth the trouble.

Truly Outstanding⭐⭐⭐⭐⭐From packaging to performance, this item delivers excellence.

I used the 110v adapter to heat the cup. After 20 minutes the water was luke warm at best. The adapter was very hot. It should be the other way around. So I ordered a replacement. The replacement did the same thing. This is my first time trying this tool. So I'm not sure how it is supposed to heat the chemical to start vaporizing. I do know that a transformer that gets to hot to touch is not doing a good job. In conclusion I'm sending both kits back.

Acetone vaporizes just below 134 degrees (F). I didn't have a thermometer to measure it, but the warming cup didn't get much above that temperature. To get it to work somewhat, I had to slosh the cup around so the liquid went up the sides to a part of the cup that wasn't being cooled by the bulk of the liquid, so it would vaporize somewhat better. I got the 120V model thinking it would heat better. I was sadly disappointed. The areas near the bottom of my lenses that are badly damaged would clear as the vapor passed over them, and then go right to foggy again. I'm guessing the damage is much deeper into the plastic, although during sanding, the surface appeared evenly sanded.

I don't write reviews, but this product worked so well that I had to write one. My headlights went from a foggy yellow to clear. It took about an hour from start to finish. The instructions were super easy to follow. I totally recommend this product!