OBD2 Adapter FORSCans VINT-TT55502 ELMconfig ELM327 Modified VINTscan for All Windows Compatible with Ford Cars F150 F250 and Light Pickup Truck Scan Tool, Code Reader MS-CAN HS-CAN Switch Black

It worked perfectly on my 2016 Ford Fusion Titanium. Initially, I bought it to disable the front bulb out indicator which cause the hyper flash in the car after installing led turn signal bulbs, which i was able to disable. And upon more research and YouTube videos on hidden features on the car that could be added through forscan. I was able to enable the digital speedometer, tpms digital display and enable fog lights on with the high beam. Also, I was able to determine why my airbag light was on and I was able to get the light to turn off and clear the code. Very important as well do not forget to get the extended license, they have a 2 month trial available on the forscan website because it wont allow you to make these changes to your vehicle without it. Definitely a must buy and very easy to navigate.

Pretty simple , I wanted to find my 04 mercury marauder keyless entry code because the car didn't come with owner manual used my gf laptop plugged it in and the code pop up thanks

Worked great used it on my Ford Fusion tied into my laptop serial port using Forscan software.

The web link provided doesn't work. Search for the driver CH340 if it doesn't install automatically.Works well once you get the proper driver. The web link provided doesn't work. So you can just search for the CH340 Driver in Google.

This obd2 adapter works flawlessly you won't be disappointed in the purchase or the delivery.

No software included is about the only negative. Here is the story however... I have a 2005 F-150 with a Ford factory rebuilt transmission. (The old one had no second gear and was shot after 200,00 miles from the previous owner hauling around a popup camper on it) So $3,500 later and not long after the new transmission was installed, the truck started slipping in second gear again!!! Makes zero sense at this point. Anyway, I have two OBD readers for my E39 BMW and I figured I'd try an OBD reader for my Ford truck. The software has to be downloaded from a couple of strange websites and my antivirus software did not like them at all, so I had to disable it in order to get them and install them. The sites are safe, but the antivirus didn't, so no big deal, just disable it temporarily for the installation. Anyway, once you install it and follow the tri-fold user guide included with the scanner, you just plug it in and run Forscan lite software. Works perfectly and yes, the switch on the unit is a little bit of a pain to deal with, but it doesn't hurt the car at all. Very safe to use. I knew from the BMW that when some major components are installed, you need to tell the car to clear your adaptions so that the car can re-learn your driving style and environmental conditions. This worked for the BMW with the transmission torque converter slip I was getting, so I tried it on the Ford and sure enough it worked! It has not slipped since and is still adapting and learning to my driving style. Problem solved and for only $18 at that!!! A little while back I asked the local Ford dealer how much to diagnose and repair or replace my factory warrantied transmission and they said around $1,800 even with the full warranty I have on it!!! Well, worth every penny for this OBD scanner! Just be careful and do not erase the engine adaptations because you will have to complete drive cycles in order to pass emissions. That's the biggest take from this. Just be careful and if in doubt, go to the online enthusiast forums for your particular vehicle. Happy motoring!!!

Doesn’t provide all functions of Forscan on the Ford Transit T-250. Once it connected to the vehicle Forscan built the vehicle profile but it warned that the adapter (this product) was not the best for use on this vehicle therefore some functions of the Forscan program will not work. The oscilloscope function would not display the selected waveforms, so the warning was proven correct.

I have a 2017 forward fusion energi and a 2017 Ford expedition. The double honk on exiting the vehicle with the engine running was driving me crazy in both vehicles. I had downloaded forscan 2 years ago but never followed through. Finally, with some trepidation, I ordered this OBD2 adapter. The 1st time through I had not read the instructions and so did not have the driver installed. I then read the quick start and fixed my error after which everything ran very smoothly. The driver is compressed in the .rar format so you will need a program such as WinRar to unpack the driver prior to installation.The next step is to download and install ForScan and complete the application process for a complementary extended license which is immediately available for download once registered. Import that license file to ForScan and you are ready to go. You will also need to query the ForScan Forums to find the data profile for your vehicle so you know which modules and which codes you will need to scan into the programming system to update your preferences. ForScan is quite powerful and if you don't know what you are doing, or you don't pay attention, you can screw up your vehicle. You will need to scan your vehicle for the various modules, highlight the one you wish to update, and then press the programming button (a small triangle pointing to the right at the bottom of ForScan) to generate the setting codes which you will then be able to modify and write. When you do click the button to perform the data write it will tell you the checksum is not correct. Continue anyway and it will reset the checksum to the proper value.I am finally free of the double honk Ford love song which was not only driving me crazy but everyone else in the senior living community where I would pick up my 94-year-old mother. Ford needs to have their heads examined for not including the ability to turn this Honk Honk off in the usual 'advanced' vehicle settings tab (I smell lawyers).